Change Settings - Medela Invia Liberty Mode D'emploi

The settings can only be changed when the pump is in the administrative mode.
The settings possible to change are the Pressure, Unit pressure, On time, Off time, Language and
Time zone. Pump number, Pump run-time and Version can only be viewed and not changed.

Change settings

10. Apply the dressing, refer to the individual Dressing Kit IFU.
Connect the canister tubing to the dressing.
11. Press "On"
1 minute after the last button has been pressed,
the Invia Liberty Pump switches into patient mode
automatically and the display is locked.
➡
1 minute after the last button has been pressed,
the backlight turns off. When alarm is activated or any
button is pressed, the backlight will illuminate.
1. To enter the administrative mode,
➡
unlock the display by press and hold [
2. Press the soft buttons [
3. To change setting, choose with the Selection buttons
[ ] or [
[ ] to start the pump.
+ ] at the same time.
].
–60 to –200 mmHg (– 8 to –27 kPa)
Languages according to list
], press [ ].
Selection
kPa / mmHg
1 – 8 min
1 – 8 min
Selection
+12 until -12 hours GMT
as displayed
as displayed
as displayed
23