Re-Arranging The Tv Channels - Marmitek TV ANYWHERE Guide Utilisateur

recognize and store all TV channels available on your antenna system. A status bar will indicate
the progress. At 100% the search will be completed within 1 minute.
SCANNING
Please wait
vhf
7. When the SCAN procedure is finished, the TV Anywhere will show how many TV channels
were found. The screen below will be displayed for 4 seconds.
SCAN COMPLETE
FOUND xx CHANNELS
8. After the "Scan complete" screen has disappeared, you can select TV channels by pressing
the PROG+ and PROG- buttons or by using the numeric keys on the remote control.
! Because the tuner will also cover weak channels, there is a chance that the list will contain
some "empty" channels. If you see any of these channels, you can delete them by pressing the
CHANNEL DELETE button on your remote control. If you press this button, the word "DELETED"
will be displayed on the screen. 4 seconds later the TV channel will be deleted from the list.

3.1. Re-arranging the TV channels

The TV Anywhere lets you re-arrange the order of the TV channels, to create your favorite list.
1. Move up or down the TV channels using PROG+ and PROG- and look for the TV channel
you want to move to position 1 on the list.
2. When you have found the TV channel of your choice, press COPY. The screen now reads
"COPIED. READY TO MOVE".
3. Now move to position 1. You can do this by using PROG+ and PROG- or by pressing 1 on
your remote control.
4. When you have arrived at position 1, press PASTE. The channel has now been moved from its
original position to position 1 on the list. The screens show "ADDED TO PROGRAM LIST".
! The original TV channel on position 1 is automatically moved to position 2, the channel on
position 2 is moved to 3, etc. This means that the complete list is automatically being moved
down and that no channels are lost.
5. Repeat steps 1 to 4 to move TV channels to positions 2, 3, .... etc.
8
uhf
© MARMITEK