Introduction; Content Of The Packing; Cat5E/Cat6 Cable Requirements - Marmitek MegaView 60 Guide Utilisateur

Introduction

Congratulations on your purchase of the Marmitek MegaView 60! The MegaView 60
enables you to easily extend an HDMI (High Definition Multimedia Interface) signal or
DVI (Digital Visual Interface) over two CAT5e/6 cables. Maximum CAT5e/6 cable
length is 30 metres for 1080p resolution and 60 metres for 480p resolution. Appliances
connected to this may include an HD set-top box, media center PC, HD-media player,
blu-ray disk player or game console.
All Marmitek products are manufactured with the utmost precision and are of high
quality. Please read this manual carefully and follow the instructions to enjoy the
possibilities of this product optimally.

Content of the packing

1x transmitter (HDMI Transmitter)
1x receiver (HDMI Receiver)
1x Power adapter
1x User manual

CAT5e/CAT6 cable requirements

• UTP-, FTP- or STP-cable
• 24AWG or lower
• Solid twisted pair
• 100 ohm at 1MHz
• RJ-45 jack according to EIA/TIA T568B standard
Instead of CAT5e cable, CAT6 cable may also be applied (this offers better quality).
Use a 'solid twisted pair CAT-5e or CAT-6 cable' in order to optimise transfer quality.
4 © MARMITEK