Getting Started; Installing The Transmitter; Installing The Receiver - Marmitek Audio Anywhere 625 Guide Utilisateur

4

Getting started

4.1

Installing the transmitter

The transmitter can be connected to any audio source, including a
TV, satellite receiver, MP3 player, stereo equipment, etc.
1. Connect the mini jack plug to the headphone connection
point on a device such as your TV, smartphone or radio/CD
player.
Use the converter cable supplied to connect the
Audio Anywhere 625 transmitter to the AUX OUT coaxial
(Cinch/RCA) connection on your sound system.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Audio Anywhere 625 transmitter will now automatically
switch on and the green LED will begin to flash.
4. Now the sound of your audio source will be reproduced.
4.2

Installing the receiver

1. Connect the mini jack-plug to the AUX IN on a docking
speaker or radio/CD player, for example.
Use the converter cable supplied to connect the
Audio Anywhere 625 receiver to the AUX IN coaxial
(Cinch/RCA) connection on your sound system.
2. Connect the adapter to the mini USB port and insert the
adapter into the electrical socket. The red LED will now light
up.
3. The Audio Anywhere 625 receiver will now automatically
switch on and the green LED will begin to flash.
The transmitter and receiver will now attempt to connect with one
another and you will hear the audio source on the device
connected to the receiver. The green LED will stop flashing and
then stay illuminated.
Audio Anywhere 625
7