Getting Started; First Use; Installing The Transmitter; Installing The Receiver - Marmitek Audio Anywhere 725 Guide Utilisateur

4

Getting started

Please take the following steps before using the product:


Installing the transmitter.



Installing the receiver.


Connecting the transmitter and receiver.

Setting the volume.

Enjoy!
We will now explain this step by step.
4.1

First use

The Audio Anywhere 725 receiver has a built-in rechargeable
battery.
Upon first use, we recommend that you fully charge the battery
first. To do this, use the included USB cable and connect it to the
supplied adapter. During charging, the red LED will flash slowly.
It is normal for the first charge to take about 2 hours. Once the
battery of the Audio Anywhere 725 receiver is fully charged, the
red LED will switch off.
4.2 Installing the transmitter
Any audio source can be connected to the transmitter such as a
TV, computer or audio system.
Connect the mini jack plug to, for example, the headphones jack
of your TV, smartphone or radio/CD player.
1. Connect the adapter to the micro USB port and plug the
adapter into the wall socket.
2. Press the on/off button. The blue LED will now start to flash
slowly.
3. Let your audio source produce sound.
4.3 Installing the receiver
1. Connect the mini jack plug (jack out) to, for example, the
AUX IN of an active speaker, headphones or a radio/CD
player.
Audio Anywhere 725 9