Connecting The Device To The M Egaview20 M Odulator - Marmitek M EGAVIEW20 Guide Utilisateur

1x M egaView 20 modulator
1x Pow er adapter
1x IEC Antenna cable (1 metre)
1x M anual
3. CONNECTING THE DEVICE TO THE M EGAVIEW20
M ODULATOR
Sw itch off all devices before you start connecting. Then connect the device
you w ant to connect (for instance the DVD-player or AV-camera) to the
M egaView 20. You can connect the device w ith a SCART cable or a cinch
cable. Use one of the tw o possibilities mentioned below.
Connect ing an A/V appliance via SCART (1)
You can use the 'SCART connection' on the modulator to add the video-
and audio signal desired to the antenna signal. You can use a SCART cable
(not included) and you connect this to the 'SCART IN' of the M egaView 20.
Tip: See chapter 6 Extra options for the possibility to connect
multiple devices
Connect ing an A/V appliance via cinch cable (2)
Any so called composite audio- and video signal can be connected to the
modulator. For this you can use a cinch cable (not included). M ake sure the
colours of the plugs and the sockets are corresponding. That means red to
red, w hite to w hite and yellow to yellow.
M EGAVIEW20
1
2
SCART IN
ANT/RF IN ToTV/RF OUT
5