Set Contents; Installing The Transmitter - Marmitek INVISIBLE SCART 300 Guide Utilisateur

2. SET CONTENTS.

1 Transmitter.
1 Receiver (scart).
1 IR receiver.
2 Power adapters.
1 IR extender with 3 LEDs.
1 3.5 mm jack plug/RCA adapter (audio).
1 RCA/RCA cable (white/red/yellow).
1 Scart/scart RCA adapter.
1 User manual.

3. INSTALLING THE TRANSMITTER.

See images 1 and 2.
The transmitter can be connected to any A/V device.
1. Connect the RCA/RCA cable to the 'A/V IN' on the back of the transmitter [C+D]. Make
sure the colours of the plugs and the connectors correspond.
2. Connect the other side of the RCA/RCA cables to the A/V device from which you want
the signal to be transmitted.
If the A/V device has a scart connection, we advise you to use it.
Plug the scart/scart RCA adapter included into the scart connection of your A/V device.
If another scart cable has already been connected to the 'OUT' connection of your A/V
device, you should remove it. Plug the scart/scart RCA adapter into the scart connection
of your A/V device. The cable you just removed from the A/V device can be reconnected
to the back of the scart/scart RCA adapter. This ensures that the original connection is
preserved.
Connect the RCA/RCA cable to the yellow, red and white connections on the scart/scart
RCA adapter. See image 1 for more details.
3. Switch the channel selector [A] (A-B-C-D) to A.
4
GIGAVIDEO TRANSMITTER
ORIGINAL SCART CABLE
TO A/V DEVICE
SCART/SCART
RCA ADAPTER
Image 1
TO TV
MARMITEK