Installing The Transmitter With Extra Equipment - Marmitek TV ANYWHERE Guide Utilisateur

2.1 Installing the TV Anywhere transmitter
1. Connect a coaxial cable [A] to your antenna wall socket.
2. Connect a coaxial cable to the Antenna Input [3] of your TV Anywhere transmitter.
3. Select a channel using the Channel Selector slide switch [9] (see page 2), e.g. C.
4. Connect the power adapter to the TV Anywhere transmitter [6].
5. Switch on the unit with the ON/OFF switch [7].
6. Make sure the TV Anywhere transmitter is placed some distance away from other
equipement which may interfere. Do not place the transmitter on top of your audio and/or
video equipment.
7. Direct the flat antenna [8] at the receiver.
8. See chapter 2.3 Installing the receiver.
2.2 Installing the TV Anywhere transmitter with extra equipment (satellite receiver,
Set-Top Box, DVD player, etc )
RADIO/ TV
This setup allows you to watch all sources both in the main room TV and the second room TV.
1. Connect a coaxial cable [A] to one side of the antenna splitter [B].
2. Connect the other end of the coaxial cable [A] to the antenna input [3] of the TV Anywhere
transmitter.
3. Connect the existing coaxial cable (C) to the other end of the splitter.
TV Anywhere™
RADIO/ TV
A
B
C A
9
8
7
3 6
4 D
SAT / HDD / SETTOPBOX / DVD
3
E
TV1
F
5