Reconnecting; Re-Pairing; On / Off Switch; Led Status - Marmitek BOOMBOOM 50 Mode D'emploi

RECONNECTING

Whenever the BoomBoom 50 or your headphone has been
switched off, the BoomBoom 50 will automatically reconnect as
soon as the BoomBoom 50 and the headphones are turned back
on again.

RE-PAIRING

To re-pair the BoomBoom 50 with another set of Bluetooth
headphones.
Press and hold the "pairing" button on the BoomBoom 50 for 0.5
seconds. Any previously paired device will be deleted. The
BoomBoom 50's red/blue LED will flash and the BoomBoom 50
will automatically make a connection with a set of Bluetooth
headphones that are in pairing mode.

ON / OFF SWITCH

If you want to turn off the BoomBoom 50, press the button for 2
seconds. Would you like BoomBoom 50 on again, then you press
the button for 2 seconds.

LED STATUS

LED status
Blue LED flashes quickly
Blue LED continuously on
Red / Blue LED flashes slowly
Blue LED flashes slowly
6
Omschrijving
Startup
Connected
Pairing mode
standby
© MARMITEK