Connecting To Your Tv Or Sound System; Pairing - Marmitek BoomBoom 55 Guide Utilisateur

6.1

Connecting to your tv or sound system

For best results, connect the BoomBoom 55 to the digital audio
output (toslink or coaxial) of your TV or audio system:
- Connect your digital audio cable (not included) to the digital
audio output of your TV or audio system
- Connect the other end of the audio cable to the correct
BoomBoom 55 audio input
- Connect the supplied USB power cable to the BoomBoom
55's POWER jack and to the USB power adapter and plug it
into the wall outlet
If your TV or audio system does not have a digital audio output,
you can also connect the BoomBoom 55 to the analogue audio
output or headphones-out:
- Connect one of the two supplied audio cables to the audio
output of your TV or audio system
- Connect the other end of the audio cable to the BoomBoom
55 audio input
- Connect the supplied USB power cable to the BoomBoom
55's POWER jack and to the USB power adapter and plug it
into the wall outlet
6.2

Pairing

1. Make sure your Bluetooth headphones are close to the
BoomBoom 55. The best distance is about 1 metre.
2. Put your Bluetooth headphones in pairing mode (please refer
to your headphones' user manual).
3. Set the BoomBoom 55's switch to ON and press the pairing
button. The LED will now flash quickly.
4. The BoomBoom 55 will now be automatically paired with
your headphones. Once the pairing has been established,
the blue LED on the BoomBoom 55 will light up continuously
(this may take a while).
8 © MARMITEK