Mondolfo Ferro TBE160 TERRA Manuel D'utilisation page 64

All machine parts are powered by low voltage (24V), with the exception of the hydraulic
power unit and the turntable rotation motor inverter, which are powered with mains
voltage.
WARNING
Make sure that all parts of the hydraulic circuit are tightened correctly. If pressurised
oil escapes, it can cause serious injury.
WARNING
The machine is equipped with devices that guarantee the operator's safety:
The tyre changer uses, on the tool trolley, some protections that prevent crushing
between the tool arm and the sliding trolley and between the tool trolley and the
ground.
An acoustic-luminous indicator located on the electrical board is activated by the
machine each time potentially dangerous manual or automatic commands are
executed. The indicator has a flashing orange light.
The following commands activate the acoustic-luminous indicator:
• Turntable opening/closing.
• Turntable lifting/lowering.
• Tool arm + bead breaker disc lifting/lowering.
WARNING
To prevent accidents when using the included or optional accessories, make sure
that the mechanical parts have been correctly installed and well fixed to the parts.
When working, firmly grip the manual accessories.
NOTE
The machine may also be used for tyre
grooving.
For this operation, position the speed
selector (E, Fig. 14) to the first speed
and then activate turntable rotation
using the specific control. At this point,
the turntable will rotate at a low speed
and only in a clockwise direction.
Turntable rotation can also be activated
for this operation with a pedal control,
using a specific accessory kit.
WARNING
Always check that the tyre size is compatible with the rim size prior to assembly.
64
C d e
F
b
a
- E - Operator's manual
nGlISH
Fig. 14