Wiring Diagram - Mondolfo Ferro TBE160 TERRA Manuel D'utilisation

Bead
Each enlarged edge of the tyre that is in contact with the wheel rim.
Tubeless
Tyre that does not have an inner tube.
Tool
A specifically shaped part that is used for mounting and demounting.
code 4-330328 (Fig. 40)
code 4-330329 (Fig. 41)
A1 BHD2SX BOARD
XC1 CONTROL CONSOLE PARALLEL CONNECTOR
YV1 OIL DRAIN S.V.
YV4 LEFT ARM MOVEMENT S.V.
YV5 RIGHT ARM MOVEMENT S.V.
YV6 TURNTABLE LIFTING S.V.
YV7 TURNTABLE LOWERING S.V.
YV8 TURNTABLE OPENING S.V.
YV9 TURNTABLE CLOSING S.V.
YV10 TOOL ARM UP S.V.
YV11 TOOL ARM DOWN S.V.
YV12 LEFT TOOL ROTATION S.V.
YV13 RIGHT TOOL ROTATION S.V.
AP1 INVERTER BOARD
A3 M2 CONNECTION TERMINAL BOARD
F1 FUSE T2A 5X20, ON BOARD
F2 BLADE FUSE 10A, ON BOARD
FU BOARD PROTECTION FUSE
FU1 400V: FUSE 1A gG 400V 10.3X38
FU2 FUSE T3A 5X20
HL1 MAINS PRESENCE LIGHT
H1 LUMINOUS/ACOUSTIC INDICATOR
KM1 M1 2ND MOTOR SPEED REMOTE SWITCH
KM2 M1 1ST MOTOR SPEED REMOTE SWITCH
KM3 M1 2ND MOTOR SPEED REMOTE SWITCH
M1 HYDRAULIC POWER UNIT MOTOR
M2 TURNTABLE MOTOR
QF1 M1 MOTOR THERMAL MAGNETIC SWITCH
QS1 MAIN SWITCH
QS2 KM2 MANUAL CONTROL SWITCH
SB3 GROOVING ROTATION PEDAL
TC1 150VA TRANSFORMER
XC1 CONTROL CONSOLE PARALLEL CONNECTOR
XC2 GROOVING ROTATION PEDAL CABLE CONNECTOR
- E - Operator's manual
nGlISH

WIRING DIAGRAM

85