Mondolfo Ferro TBE160 TERRA Manuel D'utilisation page 55

i
nStallation ClearanCeS
ATTENTION (for radio versions only)
Before starting with installation, make sure that no machines working with the
same frequency band are located within a radius of 200m from the selected in-
stallation spot.
In the case of interference, request a different frequency band.
WARNING
When choosing the installation spot it is necessary to respect the current regula-
tions on safety at work.
The machine must be installed on a stable and rigid floor to prevent and avoid any
structure deformation.
Position the machine in a manner that guarantees access to all four sides. In particular,
check the minimum space required for the work indicated in Fig. 6:
- at the front for wheel loading and unloading;
- at the rear to be able to view the work being performed.
Fig. 6
1500 mm
IMPORTANT: for correct, safe use of the equipment, we recommend a lighting level
of at least 300 lux in the place of use.
- E - Operator's manual 55
nGlISH