Publicité
A A
146671AB_Neox_manual_NL EN FR DE.indd 29
146671AB_Neox_manual_NL EN FR DE.indd 29
The anti-tip support - if properly adjusted - pro-
tects the wheelchair user from tipping backwards.
The risk of tipping the wheelchair backwards is in-
fluenced by:
•
•
•
Adjust the anti-tip as necessary based on the abo-
ve considerations.
Adjustment of the camber of the rear wheel
Optionally, an axle plate with 3 degrees of camber
is available. To make use of this option, follow the
steps below.
1. remove the wheel (QR) and axle bushing (C)
2. Remove the wheel cover by loosening the 2
B B
C C
3. Insert the camber wheel plate and secure it
4. Put the axle bushing back in the desired posi-
5. Insert the wheel
Check that there is enough space between the
wheel and the side of the frame.
the position of the user's center of gravity in
the wheelchair (which is determined by factors
such as axle position, backrest angle, seat
angle, seat tilt, and weight distribution over
the body (e.g., amputations).
any restlessness or spasms of the user.
the slope on which you are driving.
from the frame
Allen screws (A and B).
with the two Allen screws.
tion.
EN29
28-5-2024 13:55:18
28-5-2024 13:55:18
Publicité
