Publicité
Inspired by life
Note:
•
Check that there is no conflict between the
front wheels and the leg rests.
Anti-tipping supports
The anti-tipping supports (optional) can be tem-
porarily swivelled forward to make it easier, for
example, to climb a curb or a high threshold.
1. Push down the horizontally spring loaded part
of the anti-tipping support (A).
2. Turn the anti-tipping support inwards and
forwards.
3. Repeat for the other side.
Warning:
•
Inform the occupant when the anti-tipping
supports are folded away and ensure that
the anti-tipping supports are pushed back
to their original position after the obstacle
has been cleared.
Adjusting the height of the anti-tipping support:
Rough adjustment
1. Loosen the 2 Allen screws that secure the anti-
tipping support to the rear module.
2. Move the anti-tipping support to the other
mounting position
3. Retighten the 2 Allen screws (C).
Fine adjustment
1. Remove the Allen screw (B) and the bushing.
2. Adjust the anti-tipping supports to the desired
height.
3. Replace the dowel and tighten the Allen screw
(B).
EN28
146671AB_Neox_manual_NL EN FR DE.indd 28
146671AB_Neox_manual_NL EN FR DE.indd 28
A A
C C
B B
28-5-2024 13:55:18
28-5-2024 13:55:18
Publicité
