Publicité
A
A
146671AB_Neox_manual_NL EN FR DE.indd 25
146671AB_Neox_manual_NL EN FR DE.indd 25
Adjusting the height of a push handle
1. Unlock the quick-release lever (A) by moving the
lever upwards
2. Adjust the push handle to the desired height.
3. Lock the push handle by placing the quick-
release lever (A) vertically against the frame
Armrests
The armrests are adjustable in height, depth and
width.
Inserting the armrests
Insert the plug-in tube with the armrest straight
down into the side holder.
Note:
• Make sure the side shield is on the seat side, not
the wheel side.
Removing the armrest
Lift the armrest (with side shield) vertically up from
the side holder.
Adjusting the height of the armrest
1. Loosen the Allen screw (A) on the front of the
armrest.
2. Adjust the armrest to the desired height.
3. Retighten the Allen screw (A).
Adjusting the depth position of the armrest
A
A
1. Loosen the Allen screw (B).
2. Set the desired depth.
3. Retighten the Allen screw (B).
EN25
28-5-2024 13:55:16
28-5-2024 13:55:16
Publicité
