Publicité
Out of the box
Mains power
adaptor socket
•
Connect the mains power adaptor to the socket at
the back of the unit.
•
Position Halo on a flat surface.
•
Plug in at the mains.
The Lumie touch interface briefly illuminates whilst the
touch sensor is calibrating.
Halo is now ready to use.
Note: If you are using Halo and the touch interface doesn't
seem to be working properly, repeat the last steps and
make sure you don't press the touch interface whilst the
touch sensor is calibrating.
ENG 7
Legs attach
magnetically
Publicité
