Publicité
7.2
FURTHER INFORMATION
If you are sure that you have sufficient knowledge and skills, you can find all the necessary information about the above mentioned tasks on the websites of the component manufacturers. Please mind that
you take responsibility for all jobs carried out by yourself and that warranty and guarantee claims expire in case of incorrect service or installation.
• SRAM / Rock Shox: sram.com/service
• Magura:
www.magura.com/de/components/techcenter/
• Newmen:
www.newmen-components.de
• Fox:
www.ridefox.com
• Sixpack:
www.sixpack-racing.com
• Bikeyoke:
www.bikeyoke.de
• Stans:
www.notubes.com
7.3
TORQUES
All screw connections must be tightened with a suitable torque wrench. When handled correctly, this prevents overstretching of the screws with subsequent risk of breakage. The torques specified here apply
to unlubricated threads. If screws are lubricated, the coefficient of friction changes considerably and the torque must be selected lower. The following table lists all necessary tightening torques of your bike.
Components
seat clamp
seat post clamp
caliper mount front and rear wheel
front wheel axle
rear wheel axle
lockring cassette
fixing screw rear derailleur
Mounting screws for brake discs
fixing screw crank
Pedals
Handlebar control elements
Manufacturer, Model
all
all
all
all
all
all
all
all
all
all
all
Tightening torque
see lasered torque*
see lasered torque*
6 Nm
see manufacturer' s specifications
12 Nm
40 Nm
see assembly instructions
6.2 Nm
see lasered torque
35 Nm
see lasered torque*
also observe the instructions of the handlebar manufacturer!
93
Publicité
