Publicité
// USER MANUAL
TASK/CHECK
Check brake efficiency: While standing, pull both brake levers in succession and move the bike back and forth.
→ The front and rear wheel must lock when the brake is applied.
Check brake hoses and connections for brake fluid leakage and defects.
→ No brake fluid may leak at the hose connections.
Check the bite point of the brakes: Pull one brake lever after the other while standing.
→ After about half of the lever travel, a clear bite point must be felt.
Check the wear of the brake pads.
→ The brake pads with a metal backing plate must be at least 0.5 mm thick.
Check the wear of the brake disc.
→ Minimum thickness of the brake rotors: 1.7 mm
Check the suspension elements for damages.
→ There must be no damage.
Sit on the bike with all your cycling equipment (helmet, backpack, shoes, etc.) and take a normal riding position.
→ We recommend a SAG of 15% - 20% on the fork and 20% - 30% on the shock.
→ If necessary, change the air pressure of your suspension elements.
Check the frame for damages and deformation.
→ There must be no damage.
Check that all cables and hoses are in the cable clamps and that all clamps are tight.
→ All cables must be firmly seated in the cable clamps.
Check the tightening torques of the pivot points of the rear triangle and the shock mount.
86
Publicité
