Publicité
// SWITCHING ON YOUR BIKE
Before the first use the battery pack must be activated by connecting it to the charger. The bike cannot be switched on without activating the battery pack!
1
ON / OFF
1.
Press the power button and hold it pressed for a short time.
→ After a short time, the system is activated and the display on the top tube switches on.
2.
Set the assistance level using the upper switch on the controller on the right-hand side of the handlebar.
→ You can choose between two support levels, RANGE and RALLY.
ASSIST LEVEL
RANGE MODE / RALLY MODE
A wide range of settings and personalizations
can be made to your SRAM Powertrain
System.
Scan the QR code to go
directly to the SRAM
online manual.
Publicité
