Publicité
// ADJUSTING THE SUSPENSION ELEMENTS
Your bike is delivered with a basic adjustment of the suspension elements. Before the first ride, the air pressure in the suspension elements must be adjusted to your body weight.
1
1.
Unscrew the valve cap of the shock / fork.
2.
Screw on the shock pump and inflate the shock / fork up to the required pressure.
→ Observe the instructions for operating the shock pump.
→ We recommend a SAG* of 15% - 20% on the fork and 20% - 30% on the shock.
Please pay attention to the manufacturer' s instructions of the suspension elements for the air
pressure. The corresponding manuals are included.
3.
Unscrew the shock pump and screw the valve cap onto the valve.
A
B
* The air pressure of your suspension elements is adjusted via the so-called
SAG (negative suspension travel). The SAG is the degree by which the shock and
the fork compresses under the weight of the rider. To adjust the SAG, sit on the
bike with all your cycling equipment (helmet, backpack, shoes, etc.) and take a
normal riding position. No air can escape when unscrewing the shock pump.
Publicité
