Publicité
TASK/CHECK
Verify the tight fit of the stem: Stand in front of the bike, clamp the front wheel between your knees and try to twist the handlebars.
→ It must not be possible to twist the handlebar with normal force.
Check the headset for play: Stand next to your bike, pull the front brake lever and gently push the bike backwards and forwards.
→ No bearing play must be detectable.
Make sure that all components are tight.
→ Loose components must be tightened to the required torque (see ). In case of doubt, contact the PROPAIN Service.
Check the tight fit of the seat post: Stand behind your bike, grab the saddle with one hand and try to twist it.
→ The saddle and the seat post must not be able to be twisted.
Check the tight fit of the grips.
→ It shall not be possible to twist the grips by hand.
87
Publicité
