Publicité
// CHARGING THE BATTERY PACK
// CHARGING THE MOUNTED BATTERY PACK
1
Before charging and using the battery pack, read the user manual of the battery pack!
1.
Remove the dust cap from the charging connector.
2.
Connect the charger to the charging socket of the battery pack and connect the charger to a
mains socket.
→ The display is switched on and shows the charge status, but the drive unit cannot be
switched on as long as the charger is connected.
// CHARGING THE DISMOUNTED BATTERY PACK
2
100 %
76 - 99 %
51 - 75 %
26 - 50 %
0 - 25 %
Before charging and using the battery pack, read the user manual of the battery pack!
1.
Dismount the battery pack (see previous page).
2.
Plug the adapter onto the charging socket of the battery pack.
You will find the adapter in the box with the other accessories.
3.
Connect the charger to the socket of the adapter and connect the charger to a mains
socket.
→ A permanently illuminated red LED indicates that the battery is charging.
→ A permanently green LED on the charger indicates a fully charged battery.
Publicité
