Publicité
To Remove the Battery Pack
WARNING: Put the tool on the ground before removing the battery pack. Injury could
result if the battery pack falls. Never remove the battery pack at a high location.
1.
Turn off your tool.
2.
Press the battery-release button to disengage the battery from the latch. (Fig.6)
3.
Remove the battery from the power head.
6.2 To Start the Power Head
WARNING: Avoid overworking or overusing your power tool. Use the tool as
intended to avoid damage to the machine or yourself.
WARNING: Only switch the motor on when your hands and feet are away from
moving parts.
WARNING: Never operate the power head without an attachment.
Note: The attachment continues to move for a few seconds after the motor is switched off.
1.
Stand upright and hold the product as designed. Place one hand on each handle.
Make sure the machine is not touching the ground or any other objects. (Fig.7A)
2.
Press the lock-off button and hold it in that position, depress the trigger to turn
on the tool. Release the lock-off button and continue to squeeze the trigger for
continued operation. (Fig.7B/7C)
Fig. 7A
16
Lock-off button
Fig. 7B
Fig. 6
Fig. 7C
Trigger
Publicité
