Publicité
Tips for best snow removal results:
1.
Begin your snow evacuation by moving the tool in a back and forth motion. Make sure
to overlap clearing paths.
2.
Determine the direction of the wind. If possible, move in the same direction as the
wind so that the snow is not thrown against the wind, into your face, or on the cleared
path.
3.
Only operate the machine in daylight hours or with good artificial light.
4.
For the best clearing efficiency, clear snow before it melts, refreezes, and hardens.
Hard packed and wet snow can be very difficult to clean up.
5.
Wet snow tends to clog and stick to the impeller and chute. Keep the impeller engaged as
much as possible when clearing wet snow to help prevent clogging.
6.
The drive speed will affect the quality of snow throwing. Moving too fast will adversely
affect the throwing efficiency.
7.
Keeping the impeller in good condition is a key factor to obtain optimal performance.
Replace the impeller within a reasonable amount of time as it begins to wear.
23
Publicité
