Publicité
5.5 Attaching the Snow Discharge Chute
1.
Locate and align the positioning tab on the discharge chute with the mounting hole
on the chute base. (Fig. 6A)
2.
Place the discharge chute over the chute base and lock in place.
3.
Rotate the chute to give access to the bolt installation. (Fig. 6B)
4.
Install and tighten the bolt. (Fig. 6B)
Mounting hole
Fig. 6A
5.6 Detaching the Snow Discharge Chute
1.
Unscrew and remove the bolt. (Fig. 6B)
2.
Rotate the chute until the positioning tab aligns with the mounting hole. (Fig. 6A)
NOTE: The discharge chute can be removed only when the positioning tab is in line
with the mounting hole.
3.
Pull out the discharge chute to remove it.
Positioning tab
Bolt
Fig. 6B
17
Publicité
