Publicité
7.3 Replacing the Hood
WARNING: Make sure all moving parts are stopped completely and the battery
pack is removed when replacing the safety guard.
WARNING: The hood is intended for prevent thrown objects including snow to hit
the operator. Replace it when any worn indicators occur.
1.
Stop the motor, remove the battery pack and wait for all moving parts to stop
completely.
2.
Lay the snow shovel attachment on its side for hood service.
3.
Remove the five screws that are located on the attachment guard. (Fig. 7.3A)
4.
Replace the worn hood with a new one.
5.
Tighten the screws that you removed before. Avoid over thightening the screw.
overthigthening srew may strip plastic thread on.
Fig. 7.3A
27
Publicité
