Publicité
en
Fault
Low flow rate
LED: flashes green
SSM relay: closed
iPWM out: 5%
LIN: Warning 25
Modbus: Warning 19
11
Spare parts
No spare parts are available for the pumps in the Wilo-Para MAXO series.
In the event of damage, the entire pump is to be replaced and returned to the manufacturer of the system in
an assembled state.
12
Disposal
12.1
Information on the collection of used electrical and electronic products
Proper disposal and appropriate recycling of this product prevents damage to the environment and danger to
your personal health.
NOTICE
Disposal in domestic waste is prohibited!
In the European Union this symbol may be included on the product, the packaging or the ac-
companying documentation. It means that the electrical and electronic products in question
must not be disposed of along with domestic waste.
Please note the following points to ensure proper handling, recycling and disposal of the used products in
question:
•
Hand over these products at designated, certified collection points only.
•
Observe the locally applicable regulations!
Please consult your local municipality, the nearest waste disposal site, or the dealer who sold the product to
you for information on proper disposal. See www.wilo‑recycling.com for more information about recycling.
Subject to change without prior notice!
80
Causes
The pump is on.
This pump operates with a flow rate
that is too low due to the high hy-
draulic resistance.
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11
Remedies
Check installation.
Publicité
