Publicité
en
1
n/
n
n
Analogue signal input (V)
< 0.5
0.5 to 1
1 to 3 (operation)
2 to 3 (starting)
3 to 10
Control input "Analogue In 0 to 10 V" without cable break function
The pump is controlled according to an analogue signal in the range of 0 to 10 V. Behaviour when a cable
breaks: If the signal cable is disconnected from the pump, e.g. due to a cable break, the pump stops.
1
n/
n
n
Analogue signal input (V)
< 1
1 to 3 (operation)
2 to 3 (starting)
3 to 10
60
/min
max
min
Off
0,5
1
2
Pump reaction
Pump runs at minimum speed (emergency operation).
Pump stops.
Pump runs at minimum speed.
Pump runs at minimum speed.
The speed of the pump increases linearly from n
/min
max
min
Off
1
2
Pump reaction
Pump stops.
Pump runs at minimum speed.
Pump runs at minimum speed.
The speed of the pump increases linearly from n
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11
3
3
10
U/V
to n
.
min
max
10
U/V
to n
.
min
max
Publicité
