Télécharger Imprimer la page

Wilo Para MAXO Serie Notice De Montage Et De Mise En Service page 48

Publicité

en
Ensure compliance with local directives or general directives [e.g. IEC, VDE, etc.] and instructions from
local energy supply companies.
Follow all information that appears on the product and ensure that it remains permanently legible:
Warning and hazard notices
Rating plate
Direction of rotation arrow/symbol for direction of flow
Labelling of connections
This device can be used by children from 8 years of age as well as people with reduced physical, sensory or
mental capacities or lack of experience and knowledge if they are supervised or instructed on the safe use of
the device and they understand the dangers that can occur. Children are not allowed to play with the device.
Cleaning and user maintenance must not be carried out by children without supervision.
2.5
Safety instructions
Electrical current
DANGER
Electric shock!
The pump is operated electrically. An electric shock may be a danger to life!
Have only qualified electricians carry out work on electrical components.
Before all work, deactivate the power supply (also SSM if necessary) and safeguard against accidental
switch-on. Work on the pump may only be started after 5 minutes have elapsed due to the dangerous re-
sidual contact voltage.
Never open control module and never remove operator controls.
Only operate the pump with intact components and connection cables.
Magnetic field
DANGER
Magnetic field!
When dismantled, the permanent magnet rotor inside the pump can pose a risk of fatal injury
for people with medical implants (e.g. pacemakers).
Never remove the motor impeller unit.
Hot components
WARNING
Hot components!
Pump housing and glandless motor can get hot and cause burns when touched.
During operation only touch the control module.
Allow the pump to cool down before commencing any work.
Keep highly flammable materials away.
48
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11

Publicité

loading