Publicité
Locks the pump's current settings and protects against undesired or unauthorised adjustment of the pump.
This function is present only on version "F02".
See section "Commissioning" for the activation procedure.
Pump kick
Prevents deposits that can form during a prolonged standstill.
The pump switches itself on for a short time every day during the standstill.
The pump must remain powered all the time to enable this function.
7
Installation and electrical connection
DANGER
Risk of fatal electrical shock!
Exclusively carry out any work on the pump/system after it has been de-energised!
WARNING
Risk of fatal electrical shock!
The cover of the control module must never be opened.
Opening the control module will invalidate the warranty.
DANGER
Risk of fatal electrical shock! Generator or turbine operation during
pump flow!
Even without the module (without electrical connection), there may be dangerous contact
voltage at the motor contacts.
•
Avoid flow in the pump during dismantling/installation work!
•
Close the existing shut-off devices in front of and behind the pump!
•
If no shut-off devices are fitted, drain the system!
WARNING
Danger of injury!
Only carry out work on the pump/system using suitable tools and once it has come to a
standstill.
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11
en
63
Publicité
