Publicité
3
Transport and temporary storage
3.1
Transport inspection
Immediately after receiving the product:
•
Check product for transport damage.
•
If transport damage is detected, take the necessary steps with the forwarding agent within the respective
time limits.
3.2
Transport and storage conditions
CAUTION
Risk of material damage!
Incorrect transport and storage can cause damage to the product.
WARNING
Risk of injury from sodden packaging!
Packaging that has been sodden loses its strength and can cause injury to persons if the
product falls out.
WARNING
Risk of injury from ripped plastic strips!
Ripped plastic strips on the packaging render transport protection void. Products falling out
may cause personal injury.
•
The pump and its packaging must be protected against moisture, frost and mechanical damage during
transport and temporary storage.
•
Permitted temperature range during transport:
–
-40 °C ... +70 °C
•
Permitted relative humidity during transport:
–
+5 % ... 95 %
•
Store in original packaging.
•
Storage of pump with horizontal shaft on a horizontal surface. Observe the packaging icon
•
Storage must not exceed the six-month period.
•
Permitted temperature range during storage:
–
-40 °C ... +60 °C
•
Permitted relative humidity during storage:
–
+5 % ... 95 %
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11
en
(top).
49
Publicité
