Publicité
en
5.3
Technical data
Technical data
Connection voltage
Protection class
Insulation class
Energy efficiency index EEI
Permissible fluid temperature
Permissible fluid temperature for domestic hot
water
Permissible ambient temperature
Max. operating pressure
Emissions sound-pressure level
Max. installation height
Minimum inlet pressure at +95 °C/+110 °C
Table 3: Technical data
1)
with regard to the best efficiency point within the dimensioning conditions.
2)
The values apply up to 300 m above sea level, addition for higher locations: 0.01 bar/100 m increase in
height.
NOTICE
See Wilo's technical product catalogue for detailed product features.
5.4
Scope of delivery
•
High-efficiency circulator
•
Installation and operating instructions
5.5
Accessories
Accessories must be ordered separately. For a detailed list and description, consult the catalogue.
The following accessories are available:
•
Mains connection cable
•
Mains connection adapter Molex SD 5025-03P1
•
Signal connection cable
•
Signal connection adapter Wilo-iPWM/LIN
•
Dummy plug for signal cable
•
Termination resistor (only for Modbus version)
•
SSM connection cable
54
Installation and operating instructions • Wilo-Para MAXO/-G/-R/-Z • Ed.04/2024-11
1~230 V +10% / -15%, 50/60 Hz
IPX4D
F
See rating plate (Fig. I, Item 7)
-20 °C to +95 °C (+110 °C with reduced performance)
0 °C to +85 °C
-20 °C to +45 °C
-30 °C to -21 °C (at max. operating pressure 8 bar
(800 kPa))
+46 °C to +70 °C (with reduced performance)
10 bar (1000 kPa)
8 bar (800 kPa) for ambient temperatures of -30°C to
-21 °C
1)
< 38 dB(A)
2000 m above sea level
1.0 bar / 1.6 bar (100 kPa / 160 kPa)
2)
Publicité
