Publicité
Saphir
TIMER ON
TIMER OFF
Switch timer on/off
HOURS +
HOURS -
Set hours
SETUP
Takes you to the setup menu
MIN +
MIN -
Set minutes
RESEND
Send last settings
DEHUMIDIFY
Activate dehumidification function
RESET
Resets the remote control and requires
repairing the remote with the Saphir�
4.7.4 Display
The remote control has an LCD (Fig� 15) that shows the
current settings� The display does not have background
lighting�
MODE
TEMP
Saphir
Fig� 15
Symbol
Description
Cooling mode
Dehumidify mode
Heating mode
Night mode
Automatic mode
Circulated air mode
Setup
40090-00130 · 01 · 11/2023
Resend
Fan setting low
Fan setting medium
Fan setting high
Temperature value
Degrees Fahrenheit
Degrees Celsius
Time display (AM / PM)
Timer On / Off
4.8
IR receiver (optional)
The IR receiver (Fig� 16) has the following display and
control panels:
4
Fig� 16
1
Green LED
2
Infrared sensor
3
ON/OFF button
4
Red LED
The additional push button on the IR receiver (Fig� 16-3),
with which the device can also be switched on and off
without the remote control (e�g� with a ballpoint pen)�
When the unit is switched on, it will return to its previ-
ous settings�
LED display
Description
Green LED flashes
IR receiver receives signals from
the remote control
Red LED lights
Malfunction
See: "Troubleshooting guide" on page 18�
1)
Product Description
1
2
3
1
EN
9
Publicité
