Publicité
Product Description
4.1
Supply air inlet and outlet
Supply air is drawn in and blown out through the vehi-
cle's floor� Holes are provided in the vehicle's floor for
this purpose: air inlet (Fig� 3-1) and air outlet (Fig� 3-2)�
Fig� 3
4.2
Circulated air intake
The room air to be cooled is drawn in via the air inlet on
the front of the Saphir (Fig� 4), or an additional flexible
air conditioning intake extends into the vehicle interior
(also see "7�3 Clean/change air filter with installed flexi-
ble air conditioning intake (optional)" on page 16)�
Fig� 4
4.3
Circulated air outlets
The cooled air is distributed in the vehicle interior
through the front-mounted ducting (Fig� 5)�
6
EN
Fig� 5
4.4
Condensation is drained via the vehicle's floor� Holes
are provided in the vehicle's floor (condensation traps,
see Fig� 6-1) for this purpose, and the condensation will
drain through them�
2
1
Fig� 6
Condensation trap
When the air conditioning system is operated for an
extended amount of time, pools of water can form
under the vehicle�
1
NOTICE
If the condensation traps are dirty, water can
enter the interior� The function of the air condi-
tioning system will be adversely affected, which
may result in damage� See "Clean condensation
trap" on page 15�
Saphir
1
40090-00130 · 01 · 11/2023
Publicité
