Publicité
Product Description
Remote control signals are sent with infrared waves to
the wall-mounted IR receiver (Fig� 11)�
There is an IR transmitter diode for this at the top of the
remote control�
To operate the air conditioning system, point the
remote control at the IR receiver�
Fig� 11
NOTICE
Do not cover the IR receiver.
The IR receiver must be exposed for fault-free
operation�
Do not place anything over the IR receiver�
Do not cover the IR receiver (e�g� with cur-
tains)�
4.7.1 Button panels
The remote control has two button panels�
The buttons for the most important functions are on the
top button panel� They are always visible�
The buttons for advanced functions are on the bottom
button panel� This can be concealed with a cover�
Push the cover down (Fig� 12-1)�
Bottom button panel is visible�
Push the cover up (Fig� 12-2)�
Bottom button panel is concealed�
MODE
MODE
TEMP
1
Saphir
Fig� 12
8
EN
MODE
TEMP
TEMP
ON
ON
TIMER HOURS
MIN
TIMER HOURS
MIN
OFF
OFF
RESET
Saphir
2
Saphir
4.7.2 Top button panel
The top button panel includes the following functions
(Fig� 13):
MODE
TEMP
Saphir
Fig� 13
Symbol
Description
MODE
Select operating modes
Cooling
•
Heating
•
Automatic
•
Circulated air
•
FAN
Set fan operating level
Low
•
Medium
•
High
•
ON/OFF
TEMP +
TEMP -
Set temperature
61 - 88 °F (16 – 31 °C)
•
In 1 °F (1 °C) steps
•
4.7.3 Bottom button panel
The bottom button panel includes the following func-
tions (Fig� 14):
MODE
TEMP
ON
TIMER
HOURS
MIN
OFF
RESET
Saphir
Fig� 14
Symbol
Description
TIME
Show / set time
NIGHT
Quiet mode
Saphir
MODE
TEMP
ON
TIMER
HOURS
MIN
OFF
RESET
40090-00130 · 01 · 11/2023
Publicité
