Publicité
Product Description
4.9
Holder for remote control (optional)
There is a holder for the remote control that can be
mounted on a wall or cabinet in the vehicle (Fig� 17)�
Fig� 17
Place the remote control into the holder or remove it
from above (Fig� 18)�
Fig� 18
4.10 Accessories
There are various accessories for the air conditioning
system� These may be installed with the air conditioning
system, depending on the vehicle manufacturer�
4.10.1 Wall-mounted IR receiver
The remote control signals will be received by an
IR receiver (Fig� 19)�
The vehicle manufacturer installs the IR receiver on an
inside wall or cabinet�
Fig� 19
10
EN
4.10.2 Truma CP plus
The air conditioning system can be controlled with the
CP plus digital control panel (available as an option)�
The CP plus control panel has an automatic climate
control function (ACC for primary heater), referred
to as AUTO mode in the CP plus menu� This automati-
cally controls the room temperature together with
the Truma Saphir air conditioning system and a
Truma Combi / Truma VarioHeat heater� In AUTO mode,
the air conditioning system will not be operated in
reverse cycle mode (heating)�
A Truma Combi / Truma VarioHeat or Alde heater
must be installed to use the automatic climate con-
trol function on the Truma CP plus�
Fig� 20
The vehicle manufacturer installs the CP plus (Fig� 20) on
an inside wall, cabinet or storage compartment� It can
be visible or hidden�
Operation
See separate CP plus control panel operating in-
structions
Saphir
40090-00130 · 01 · 11/2023
Publicité
