Table des Matières
Publicité
Removing the battery
Removing the battery pack fuse
The battery pack comes with a 40 amp safety
fuse fitted (Fig.50).
Replace the fuse using (208526) Numatic
approved part (Fig.51).
Under abnormal use;
i.e. leaving the machine without charging for a period of time, we advise that you disconnect the battery from
If the machine will be standing unused for a period of 30 days or more, then batteries must be fully charged.
Note.
Battery Care
Fig.48
Fig.49
Recharge the machine fully after its last use.
Do not leave the machine in a discharged state.
Batteries should be recharged every three months.
Charge fully the day before you start using the machine again.
Unplug the battery from the machine using the red
connection handle (Fig.48).
The battery can then be lifted from the machine for
storage or charging (Fig.49).
Fig.50
the machine.
40
Fig.51
Publicité
Table des Matières
Dépannage
