Publicité
Les langues disponibles
Les langues disponibles
CAUTION
Food may spoil when kept warm for too long.
Do not use the warm mode to heat cold food.
▶
Be sure to maintain proper food temperature. The
▶
USDA recommends holding hot food at 140°F (60 °C)
or warmer.
DO NOT warm food longer than one hour.
▶
Note
ALWAYS start with hot food. DO NOT use this mode to
¡
heat cold food other than for crisping crackers, chips,
and dry cereal.
Serving dishes, plates, and cups may be kept warm
¡
with this mode.
Foods that must be kept moist should be covered with a
¡
lid or aluminum foil.
Aluminum foil may be used to cover food. Use only
¡
heat-safe dishes.
DO NOT open the oven door unnecessarily. Opening
¡
the door will reduce the temperature of the oven.
When keeping cooked food warm, allow time for the
¡
oven to preheat before placing the item in the oven.
12 Home Connect®
Home Connect®
This appliance may be network-capable. Connecting your
Home Connect®
appliance to a mobile device lets you control its functions
via the Home Connect® app, adjust its basic settings and
monitor its operating status.
The Home Connect® services are not available in every
country. The availability of the Home Connect® function
depends on the availability of Home Connect® services in
your country. You can find information on this at:
www.home-connect.com.
The Home Connect® app guides you through the entire
registration process. Follow the instructions in the
Home Connect® app to implement the settings.
Tips
Consult the Home Connect® documents supplied.
¡
Follow the instructions in the Home Connect® app as
¡
well.
Notes
Also note the safety information in this instruction
¡
manual and ensure that it is also observed when
operating the appliance using the Home Connect® app.
Operating the appliance on the appliance itself always
¡
takes priority. It is not possible to operate the appliance
using the Home Connect® app during this time.
In networked standby mode, the appliance requires a
¡
maximum of 2 watts.
12.1 Setting up Home Connect®
Requirements
The appliance is connected to the power supply and is
¡
switched on.
You have a mobile device with a current version of the
¡
iOS or Android operating system, e.g. a smartphone.
The mobile device and the appliance are within range of
¡
your home network's WLAN signal.
Download the Home Connect® app.
1.
Open the Home Connect® app and scan the following
2.
QR code.
Follow the instructions in the Home Connect® app.
3.
12.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
12.3 Changing the settings via the
Home Connect® app
You can use the Home Connect® app to change the
appliance settings and send them to the appliance.
Prerequisits for using the Home Connect®:
The appliance is connected to the home network and to
¡
the Home Connect® app.
In order to set the appliance via the app,
¡
Home Connect® must be activated in the basic settings.
→ Page 25
Activate Home Connect ON in the oven basic settings.
The oven must be turned on.
¡
Home Connect® en-us
39
Publicité
