Boston Scientific Encore 26 Mode D'emploi page 5

2. Negative pressure may be applied to the catheter to maintain
3. Release finger latch to hold the position.
4. With the finger latch in the locked position (out),
5. Deflate balloon / lower pressure by turning the handle in a
Disposal
To minimize the risk of infection or microbial hazards after use,
dispose device and packaging as follows: After use, device may
contain biohazardous substances. The device and packaging
should be treated and disposed of as biohazardous waste or have
them treated and disposed of in accordance with any applicable
hospital, administrative, and/or local government regulations.
Use of a biohazardous container with biological hazard symbol
is recommended. Untreated biohazardous waste should not be
disposed of in the municipal waste system.
Post-Procedure
Any serious incident that occurs in relation to this device should
be reported to the manufacturer, and to the relevant local
regulatory authority.
PATIENT COUNSELING INFORMATION
Brief the patient on any relevant post-procedure instructions,
contraindications, warnings, precautions and/or adverse events
found within this Instructions for Use (IFU), pertaining to the patient.
WARRANTY
For device warranty information, visit
(www.bostonscientific.com/warranty).
The following are trademarks of Boston Scientific Corporation or its affiliates:
Encore.
All other trademarks are the property of their respective owners.
SYMBOL DEFINITIONS
Commonly used medical device symbols that appear on the labeling
are defined at www.bostonscientific.com/SymbolsGlossary.
Additional symbols are defined at the end of this document.
37 MB Drawing 50573137
deflated balloon profile by pulling the plunger back to the
desired volume and locking it in place by releasing the finger
latch (Figure 2).
pressure is increased by rotating the plunger handle in a
clockwise direction.
counter-clockwise direction or depressing finger latch.
5
Black (K) ∆E ≤5.0