Publicité
Les langues disponibles
Les langues disponibles
Fig. 67
u Slide the rails in.
u Place the drawer on the rails.
u Push all the way back.
8.8 Lid for ColdFresh with humidity
control
You can remove the compartment cover for cleaning.
8.8.1 Removing the compartment cover
Ensure that the following conditions are met:
Bottle shelf is removed (see 8.6 Adjustable bottle shelf) .
q
Fig. 68
If the drawers are removed:
u Pull the lid forward (1) until it reaches the opening in the
retaining parts.
u Lift from the back and pull it up and out (2).
8.8.2 Inserting the compartment cover
Fig. 69
If the text THIS SIDE UP points upwards:
u Insert the lip of the cover over the opening of the rear
bracket (1) and click into place (2).
u Position the cover where you want it (see 8.9 Adjusting
the humidity levels) .
8.9 Adjusting the humidity levels
You can adjust the humidity in the drawer yourself by
adjusting the compartment lid.
The compartment lid is attached to the drawer and may be
hidden by a shelf or additional drawers.
* Depending on model and options
Fig. 70
Low humidity
u Open the drawer.
u Slide the compartment lid forwards.
w When the drawer is closed: Gap between lid and
compartment. The humidity decreases.
High humidity
u Open the drawer.
u Slide the lid backwards.
w When the drawer is closed: Lid seals the compartment.
If there is too much humidity in the compartment:
u Choose the "Low humidity" setting.
-or-
u Remove any excess moisture with a cloth.
Note
With the "Low humidity" setting, ColdFresh with humidity
control can also be used as ColdFresh without humidity
control.
u Choose the "Low humidity" setting.
8.10 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment lid is attached to the drawer and can be
hidden by a shelf or additional drawers.
Fig. 71
Low air humidity
u Open the drawer.
u Slide the compartment cover forwards.
w With the drawer closed: Gap between the cover and the
compartment.
w The air moisture in the Safe decreases.
High air moisture
u Open the drawer.
u Slide the cover back.
w With the drawer closed: The cover seals the compart‐
ment.
w The air moisture in the Safe increases.
If there is too much moisture in the compartment:
u Choose the setting "low air moisture".
-or-
u Remove any excess moisture with a cloth.
Features
95
Publicité
