Publicité
Les langues disponibles
Les langues disponibles
Fig. 29
u Carry out action steps according to the illustration.
w CareMode is activated.
w The status display shows CareMode permanently.
Deactivating CareMode
CareMode is deactivated automatically after 60 minutes.
However, you can also deactivate CareMode manually at any
time:
Fig. 30
u Carry out action steps according to the illustration.
w CareMode is deactivated.
w The appliance cools to the temperature set previously.
Brightness
Use this function to set the display brightness in stages.
You can select the following brightness levels:
-
1 = 40 %
2 = 60 %
-
3 = 80 %
-
-
4 = 100 % (pre-setting)
Setting the brightness
Fig. 31
Fig. 32 Example illustration: Switch from value 3 to
value 2.
u Carry out action steps according to the illustration.
w The brightness is set.
Door alarm
Use this function to activate or deactivate the door alarm.
The door alarm sounds if the door is open for too long. The
door alarm is activated on delivery. You can set how long
the door may be open before the door alarm sounds.
* Depending on model and options
The following values can be set:
-
1 minute
2 minutes
-
3 minutes
-
-
Off
Setting the door alarm
Fig. 33
Fig. 34 Example illustration: Change door alarm from
1 minute to 3 minutes.
u Carry out action steps according to the illustration.
w The door alarm is set.
Deactivating the door alarm
Fig. 36
Fig. 37
u Carry out action steps according to the illustration.
w The door alarm is deactivated.
Device information
Use this function to indicate the model name, index, serial
number and service number of your device. You will need
the device information when you contact customer service.
(see 10.4 Customer Service)
This function also opens the customer menu.
Indicating the device information
Fig. 38
Controls
89
Publicité
