Télécharger Imprimer la page

V-ZUG Cooler V4000 Mode D'emploi page 91

Masquer les pouces Voir aussi pour Cooler V4000:

Publicité

Les langues disponibles

Les langues disponibles

Fig. 47 
u Carry out action steps according to the illustration.
w Demo mode is deactivated.
w Appliance is switched off.
u Switch on the appliance. (see 4.1 Switching on appliance
(first use))
w Appliance is reset to factory settings.
Resetting to factory settings
Use this function to reset all settings to factory defaults.
All settings you have made so far are reset to their original
settings.
Performing a reset
Fig. 48 
Fig. 49 
u Carry out action steps according to the illustration.
w Device is reset.
w Device is switched off.
Note
To reset to factory settings in battery mode: Restart is only
possible with mains voltage.
u Restart the device. (see 4.1 Switching on appliance (first
use))
7.3  Messages
There are two categories of messages:
* Depending on model and options
Category Importance
Warning
Warnings appear in the event of a door alarm or
malfunction.
Simple warnings can be cancelled by yourself.
In the event of serious malfunctions, you must
contact customer service. (see 10.4 Customer
Service)
Reminder Reminders remind you of general processes.
You can carry out these operations to end the
message.
7.3.1  Overview of warnings
Behaviour of the appliance in the event of warnings:
Warning appears on the display.
-
The alarm tone sounds at an ever-increasing volume.
-
-
The interior lighting pulsates for some warnings.
Message
Cause
The message appears if
the door is open for too
long.
Door alarm
The message appears if
there is an appliance error.
A component of the appli‐
ance has a fault.
Error
7.3.2  Ending warnings
Door alarm
Fig. 50 Example illustration
u Carry out action steps according to the illustration.
-or-
u Close the door.
w The display returns to the status indicator.
You can set how long the door may be open before the door
alarm sounds. (see Setting the door alarm)
Error
Fig. 51 Example illustration
u Press the confirmation symbol.
w Error code is displayed.
u Note the error code.
u Press the confirmation symbol.
Controls
Exit the message
Carry out action
steps (see Door
alarm) .
Carry out action
steps (see Error) .
91

Publicité

loading