Publicité
Les langues disponibles
Les langues disponibles
Fig. 55
u Pull bottle fingers away upward for removal.
8.3 Shelves
8.3.1 Repositioning / removing shelves
Pull-out stops secure the shelves against being accidentally
pulled out.
Fig. 56
u Lift the shelves and pull to the front.
w Side recess to support position.
u Repositioning the shelves: Lift up or lower to the desired
height and insert.
-or-
Fig. 57
u Removing the shelf completely: Pull out to the front.
u Easier removal: Angle the shelf.
u Reinserting the shelf: Push it in to its stop limit.
w The pull-out stops are pointing down.
w The pull-out stops are behind the front shelf.
8.4 Divisible shelves
8.4.1 Using the divisible shelves
Pull-out stops secure the shelves against being accidentally
pulled out.
* Depending on model and options
Fig. 58
u Push the divisible shelves underneath as in the illustra‐
tion.
Fig. 59
Adjusting the height:
u Pull the shelves out Fig. 59 (1) to the front one by one.
u Pull the support rails out of the catch mechanism and
engage them in place at the desired height.
u Insert the shelves one after the other.
w Flat pull-out stops at the front, right behind the support
rail.
w High pull-out stops at the back.
Using both shelves:
u Hold the bottom shelf with one hand and pull it to the
front.
w The shelf Fig. 59 (1) with the trim strip is at the front.
w The stops Fig. 59 (3) point downward.
Appliances with freezer compartment:*
u Do not place shelf rails and divisible shelves in front of
the fan.*
8.5 FlexBox
The FlexBox provides space for small food, packs, tubes,
and jars.
8.5.1 Using the FlexBox
The drawer can be removed and inserted at two different
heights. This also allows small but tall objects to be stored
in the drawer.
Fig. 60
u Remove the drawer.
u Slide in at height Fig. 60 (1) or Fig. 60 (2).
8.5.2 Repositioning the FlexBox
You can shift the height of the entire FlexBox unit.
Fig. 61
u Pull to the front.
w Side recess to support position.
u Raise or lower to any height.
Features
93
Publicité
