2. Connect the connection cable to the adhesive electrodes.
3. Insert the plug for the connection cable into the side socket on the control unit.
Please observe the instructions for use included with the accessory set.
7. CLEANING
• Remove the batteries from the device each time you clean it.
• Clean the device with a slightly moistened cloth. In case of more extreme soiling you can also
moisten the cloth with mild soapy water.
• Never drop the device.
• Ensure that no water penetrates into the device. If this should ever happen then only use the de-
vice once it is completely dry.
• Do not use any chemical cleaners or abrasive agents for cleaning.
• Once you have removed the device (operating unit), you can wash the belt in luke warm water. Use
mild soapy water or a liquid detergent for this purpose. Do not use bleaches.
• The belt is unsuitable for machine washing.
8. TECHNICAL SPECIFICATIONS
Model:
Power supply:
Electrode size:
Parameter (500 Ohm load):
Pulse duration:
Waveform:
Weight:
Belt size for waist measurement from:
Operating conditions:
Storage conditions:
Transport conditions
Changes to the technical specifications introduced for reasons of updating without notice are re-
served.
9. REPLACEMENT PARTS AND WEARING PARTS
To purchase accessories and replacement parts, please visit www.beurer.com or contact the cor-
responding service address (according to the service address list) in your country. Accessories and
replacement parts are also available from retailers.
Designation
Accessory set
10. WARRANTY/SERVICE
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet
supplied.
EM 39
3 x 1.5 V AAA (type LR 03)
approx. 11 x 12 cm
Output voltage max. 70 V p-p
Output current: max. 140 mA p-p
Output frequency: 30 – 80 Hz
200 µs per phase
symmetrical, dual-phase square wave
~ 350 g (without batteries)
70 to 140 cm. (29.5 – 51 Inch)
10 °C to +40 °C, 20-65% relative humidity
0 °C to +55 °C, 10-90% relative humidity
-10 °C - 50 °C, 10-90 % relative humidity
Item number and/or order number
647.05
18