Aileron Function (Mode 1 And 2) - FMS 1086440 Notice D'emploi

d) Aileron function (Mode 1 and 2)
If the control lever for the aileron function is moved to the left, the left wing's aileron must break out to the top and
the aileron of the right wing to the bottom. The rear rudder edge must be deflected or downwards or upwards by
approx. 10 - 12 mm. In flight, this presses the wing to the lower left and the model flies to the left with a little elevator
support.
If the control lever for the aileron function is moved to the right, the left wing's aileron must break out to the bottom
and the aileron of the right wing to the top. The rear rudder edge must be deflected or downwards or upwards by
approx. 10 - 12 mm. In flight, this presses the wing to the lower right and the model flies to the right with a little
elevator support.
When switching to mode 1, the function of the aileron would stay on the right control lever.
Figure 16
Figure 17
65