Selve Commeo/iveo SE Plus-RC Notice De Réglage page 50

commeo initial operation/setting by radio
5.2. Functions with one selected motor
Transmitter in SELECT mode
If a motor with one transmitter has been selected, the following settings can be made.
In SELECT mode
selected motor
STOP 9 s
STOP 6 s
PROG 1 s
PROG 6 s
PROG 9 s
STOP + PROG 3 s
Semi-automatic setup-mode, deletion and semi-automatic
setting of the end position
in operation bottom position, top stop/release
(see 5.2.1.)
Manual setup-mode, deletion and manual setting of the end
positions
in operation bottom position, top stop/release
(see 5.2.2.)
in operation bottom position, top position
(see 5.2.3.)
Programming/deleting transmitters (see 5.2.4.)
Transmitter programmed green status LED
Transmitter deleted red status LED
Delete transmitter table in the receiver (see 5.2.5.)
Reset receiver to factory settings (see 5.2.6.)
CONFIGURATION mode (only for authorised qualified personnel)
(see 5.2.7.)
50