Countdown Function; Adding Readings - TOOLCRAFT LDM 80T Mode D'emploi

11. Countdown function

You may automatically initiate a measurement using the countdown
timer function. Adjust the countdown within a range of 3 to 15 seconds.
To do so, proceed as follows:
1. Press the countdown button (I). The countdown icon (5) will appear
in the upper part of the display.
2. Press the countdown button repeatedly to adjust the countdown
timer.
3. Start the countdown by pressing the MEAS button (D). The product
emits a beep sound every second. At the end of the countdown, the
product will emit a longer beep sound and the measurement starts
automatically.

12. Adding readings

1. Measure the first value.
2. Press the + (K) button. The reading just measured will be moved
up one line.
3. Measure the second value. The second reading will be displayed
in the bottom line.
4. Press the + button. The readings will each be moved up one line.
The sum of both measurements is shown in the bottom line.
49