Display Unit - TOOLCRAFT LDM 80T Mode D'emploi

Display unit

1. Press and hold the settings button (H) for approx. 2 seconds.
2. Briefly press the settings button. The following is displayed:
3. Use the + (K) and – (E) buttons to select the desired unit. The
respective indicator appears in the lower right of the display. The
following units are available:
Meter
Foot
Inch
Foot/inch
Inch
Inch
Inch
4. Press the button I (F) to switch to standby mode.
Setting a stake-out point
1. Press and hold the settings button (H) for approx. 2 seconds.
2. Briefly press the settings button two times. The following is displayed:
64
Length
m
ft
in
0'00"1/32
1/32 in
1/16 in
1/8 in
Area
m
2
ft
2
ft
2
ft
2
ft
2
ft
2
ft
2
Volume
m
3
ft
3
ft
3
ft
3
ft
3
ft
3
ft
3