Settings Menu - TOOLCRAFT LDM 80T Mode D'emploi

Keep a right angle when measuring the third distance.
3. The product will automatically calculate the distance between point 1
and point 2 and display the reading in the bottom line.

22. Settings menu

Use the settings menu to recall stored readings, change the display unit,
set a stake-out point, and permanently activate the target laser.
Recalling stored readings
1. Press and hold the settings button (H) for approx. 2 seconds. The
following is displayed:
2. Press the + button (K) to display the memory slots in ascending
order.
3. Push the button – (E) to toggle through memory slots in descending
order.
4. Press the button I (F) to switch to standby mode.
63